The
B&A "Boss" Valve System
by
Bryan and Associates
The
B&A 'Boss" Valve System is CNC made to precision standards and provides
the shooter with maximum CO2 flow. This translates into increased velocity for
more effective target practice, hunting or plinking.
The
"Boss" Max-Flow Bulk Fill
valve
The "Boss" Max-Flow Bulk Fill valve
is shown as a cut-away in the air tube.
Below the cut-away valve is the complete Max-Flow valve. The Max-Flow valve features Maximum CO2 flow to the
projectile, an enlarged valve area to hold CO2, a .060" increase in valve stem movement
to improve CO2 flow and an angled transfer port. A 2240 with a 14" barrel
using the "Boss" valve can shoot a 14.3 grain .22 caliber pellet at
over 600 fps.
The "Boss" Max-Flow valve with fill cap is
$75.00.
A cut-away view of the complete "Boss" Max-Flow valve
showing the valve stem and
spring.
The
B&A Economy
Bulk Fill valve
Shown above is the B&A
Economy Bulk Fill valve. The Economy valve will provide the shooter with
more shots per fill at lower velocities than the "Boss" valve.
The B&A Economy valve with fill cap is $65.00.
The
B&A 12-gram CO2 cartridge valve
The "Boss"
12-gram CO2 valve is shown in the air tube with a CO2 cartridge. The
enlarged valve area and angled transfer port greatly improve CO2 flow, thereby
increasing velocity. Our test gun shot 14.3 grain pellets at around 590 fps. We
got about 17 full power shots per cartridge.
The B&A "Boss" 12-gram valve is $42.00.
Above is a cut-away of the stock Crosman
valve. You can see the difference in the stock and the "Boss" valve.
From top to bottom are the B&A
"Boss" 12-gram CO2 valve, the Max-Flow Bulk Fill valve, a cut-away of
the Max-Flow valve and a cut-away of the Economy Bulk Fill valve. To the right
is the fill cap.
The B&A "Boss" valve can be
installed in the 2240, 2250 and 2260 air tubes. The longer air tubes will
provide more shots per fill with the Bulk Fill valves.
2250 air tube $20.00
2260 air tube $25.00
Home
Crooked Barn Tour Ultimate
Breech
CB
Custom Airguns Used Airguns
UK Spec Airguns
Parts
& Accessories Gallery
Email
Jim at jimgiles@greenwood.net
